Where are the modules?? Look carefully and you will see 27 Unisolar 136 watt thin film laminate modules. Careful selection of roof color allows this PV array to virtually disappear! The array feeds a SMA 4000 watt inverter and web based data monitoring system.
by Nicole Mason | Sep 24, 2014
Stan and Anne Willard’s 4.8 KW PV array (24 Sanyo 200 watt modules) is equipped with Enphase micro-inverters. The Enphase micro-inverters transmit performance data to the web.
by Nicole Mason | Sep 19, 2014
Kathy and Mel have installed 3 KW of PV on their new home leaving room for an additional 3 KW in the near future. System consists of 15 Sanyo 200 watt modules and a 3000 watt SMA inverter.
by Nicole Mason | Sep 17, 2014
Jo and George Yount with their 3 KW PV system composed of 15 Sanyo 200 watt modules and a 3500 watt PV Powered inverter. The Yount’s roof was built with SIPS panels, (structurally insulated panels) so Power Trip’s install crew used special mounting plates designed for SIPS roofs.
by Nicole Mason | Sep 15, 2014
The Neal’s liked their 2.16 KW ground mounted PV array so much they decided to buy a second one. The second array (on the right) consists of 12 Evergreen 190 watt modules and a PV powered 2500 watt inverter. The total system size is 4.43 KW.
by Nicole Mason | Sep 15, 2014
Becky, David and their son, Andrew, pose with their electric car and new 4 KW grid tied PV system. Andrew is jumping faster than the photons striking the 20 Sanyo 200 watt solar modules.
by Nicole Mason | Sep 15, 2014
Richard and Joanne Rowell were the first Power Trip customers to purchase a PV system with microinverters. Their 3.9 KW system consists of 20 Sanyo 195 watt modules and 20 Enphase microinverters under the solar modules which transmit the data to the web.
by Nicole Mason | Sep 15, 2014
Jim and Cherie are all smiles about their new 5.46 KW PV array consisting of 28 Sanyo 195 watt modules and a SMA 6000 watt inverter. This installation was utilized by the Department of Labor and Industries to train their inspectors on how a proper PV installation is done. Power Trip Energy is proud of our quality work and our positive working relationship with state electrical permitting agencies.
by Nicole Mason | Sep 15, 2014
1.17 KW array consisting of 6 Sanyo 195 watt modules and a PV Powered 2000 watt inverter. The Yahres used a low interest loan through the Clallam Co. PUD and First Federal to finance the project.
by Nicole Mason | Sep 15, 2014
8.4 KW array on two structures. Total of 42 Sanyo 200 watt modules and two SMA inverters (one per structure, 3000 & 6000 watts). The house is roofed with cement tiles allowing the use of special tile flashing mounts. This client got in touch with his inner dataphile and requested a SunnyWebBox and SMA’s free data monitoring site to help track the production of this system.
by Nicole Mason | Sep 15, 2014