Residence, 8.04kW, Port Angeles, 2018

Residence, 8.04kW, Port Angeles, 2018

Rather than racking a system on the flat roof’s available, we were able to install 24 SunPower 335watt AC Modules on the east facing roof. This system will generate about 8,000kWh on an annual basis and helps reduce the amount of energy they need to purchase...
Shown Residnece, 8.7kW, Port Angeles, 2018

Shown Residnece, 8.7kW, Port Angeles, 2018

This client’s energy usage was lower than most of the same size and appliances and was able to get away with an 8.7kW array to make 100% of their annual usage. We love that the design was kept square and still allowed space for the vent at the top of the...
Residence, 11.73kW , Port Angeles, 2018

Residence, 11.73kW , Port Angeles, 2018

This client was so excited to install solar on their home in Port Angeles. They wanted to maximize their return and went with the largest system available for the Washington State Incentive. They have 35 SunPower 335watt AC Modules that will make over 10,000 kWh on an...
Residence, 7.04kW, Port Angeles, 2018

Residence, 7.04kW, Port Angeles, 2018

This client was excited to know that we could install on the standing seam roof and eliminate having to penetrate the roof to attach the rail. We were able to use S-5 clamps that clamp onto seam, rather than to the truss of the house. Not all standing seam roofs are...
Nelson Residence, 10.72kW, Port Angeles, 2018

Nelson Residence, 10.72kW, Port Angeles, 2018

This home right on the bluff in Port Angeles was outfitted with 32 SunPower 335 Modules and paired with 2 Inverters. This client was quite excited about the addition of the secure power supply outlet. This provides limited power during a daytime outage, enough to...
Residence, 10.72kW , Port Angeles, 2017

Residence, 10.72kW , Port Angeles, 2017

This home on the bluff in Port Angeles was able to hold (32) SunPower 335 Modules. They have 2 Inverters that are equipped with a “Secure Power Supply” so that they have use of a 110V outlet durring a daytime outage.